How To Put A Tarp On Your Roof

Download Article

Download Article

Tarping a roof protects your home'southward interior from being exposed to the elements because of a damaged skylight or roof. A tarp likewise protect your roof from further damage. A tarped roof provides 90-24-hour interval protection from the rain. Tarping your roof means your home is protected then you tin can brand permanent repairs after on.

1. ane

   Find the point of impairment on the roof. Use a ladder to reach your roof.^[one] If your roof is too steep to stand on, examine it from the ladder instead. Look for damaged roof tiles and scattered debris. Examine the entire roof carefully. There may be more than than one section where your roof is damaged.

   • Alternatively, get to your attic and examine the roof. Large water stains on the wood of the roof are tell-tale signs of damage.^[2]

2. two

   Mensurate the size of the damage. Carefully get onto your roof if you can. Kneel down by the damage and unroll a tape measure. Measure the precise dimensions of the harm. Remember to measure all points of damage.

   • If you don't know the dimensions of your roof, now is a good time to note them down for later.

   Advertising

3. three

   Take lots of pictures of the impairment. With your phone or a camera, take every bit many pictures every bit you can of the harm. By having show of the damage you should accept an easier fourth dimension working with your home insurance if you have it. Having pictures of the damage also ways you know how large a tarp yous demand in the hardware store.

4. iv

   Purchase a suitable tarp. Well-nigh hardware stores will sell a variety of tarp sizes. Generally, it's better to brand sure the tarp is bigger than what you need than smaller. Nigh tarps cover the bulk of a roof, merely to be safe, measure the size of the damage and make sure your purchased tarp volition cover the damaged area.^[3]

   • If you lot take whatsoever uncertainty, enquire an employee for help.

5. 5

   Ensure you accept all the proper prophylactic equipment. Repairing a roof can exist dangerous. If you're certain y'all desire to repair the roof instead of a professional person yous need to have all the advisable equipment. A sturdy pair of boots, thick gloves, a business firm ladder, protective glasses, a helmet, and a high visibility vest are all essentials.

Advertisement

1. ane

   Get some friends or family to help yous. If you lot plan on tarping your roof without a professional, you should bring some friends and family to help. Laying out a tarp tin be unsafe, so information technology's important that y'all have an actress pair of easily to aid with the more menial piece of work.

   • If you are sure you want to do it by yourself, make sure there's someone in the house that tin can help yous if at that place's an emergency.

2. ii

   Articulate all debris on the roof. If possible, wait to do this on a dry day. Bring a brush with you onto the roof. Remove all branches, leaves, and debris so that the roof is completely articulate. Make certain you brush off all the leaves and so that no insect life is trapped under the tarp subsequently.^[four]

   • If some of the branches are specially heavy, you may demand some help lifting them off your roof.

3. 3

   Unroll the tarp from the corners. Tarps can be unwieldy, specially on a windy day. Bring the tarp out of its packaging. Information technology can either come folded, or equally a curlicue. Either way, detect a corner of the tarp. One time y'all have a firm grasp on it, have a helper grab an contrary end. As you move away from each other the tarp volition naturally unroll.

4. 4

   Lay the tarp out flat over the roof. Lay the tarp across the roof so that at least 4 feet (1.2 m) lies on the sloped role of your roof on each side (known as the 'Elevation'). Let the rest of the tarp hang off the lower border of the roof that overhangs the wall (known as the 'Eave').^[five]

   • Never lay the tarp out during a storm. Never walk on the tarp.

Advertisement

1. 1

   Secure 4 2x4 (38 ten 89mm) boards with a drill to the peak ends of the tarp. The four edges are the peak ends. Lay a 2x4 board nether one of these ends. Make sure at to the lowest degree 2 feet (0.61 m) sticks out to the side. Then, attach the tarp and lath past hammering cap nails through the tarp and into the board underneath.^[6]

   • Repeat this process 3 more times so that all the superlative ends of the tarp have a board attached underneath them.

2. two

   Wrap the tarp around the boards. Wearing a pair of carpenter's gloves, wrap the tarp effectually the boards underneath so they're covered on all sides. Lift the board from underneath and rotate it counter-clockwise. One time the tarp has covered all sides, lay information technology down on the roof once again. Echo this process for each wooden board.^[7]

3. 3

   Screw through the tarp and the boards, into the roof with a drill. Cull 6 every bit spaced spots on each 2x4 board. So, with a drill, screw in 2 inches (5.ane cm) long screws. Brand certain the spiral goes through the tarp, then the wooden lath, and into the roof. Repeat this process for all the boards.^[8]

   • This secures the boards to the roof. Your tarp is now partly secured to withstand harsh weather.

4. four

   Lay four more than 2x4 (38 x 89mm) perpendicular boards and spiral them in. Lay the board flat on the roof. Place the short end of this board confronting the long side of the screwed in boards. Brand certain the new board is over the tarp. The new board should be perpendicular to the quondam board. So, choose 6 equally spaced spots on the lath and spiral in 2 inches (five.i cm) screws with a drill.^[9]

   • The screws should go through the board, then the tarp, so into the roof.

5. 5

   Attach 2 2x4 (38 x 89mm) boards with a drill nether the overhang of the tarp. With the height section secured, you need to secure the overhang. Bring the overhang onto the roof so you accept a solid surface to piece of work on. And so, put a 2x4 (38 x 89mm) wooden board under each side, making certain ii feet (0.61 m) of the board is sticking out of the side. Attach the boards to the tarp by using cap nails.^[10]

6. 6

   Roll the tarp's overhang under the eave and screw it in. Whorl the tarp dorsum off the eave and then that it'southward hanging off. Then, wrap the 2x4 (38 ten 89mm) wooden boards counter-clockwise and then the tarp wraps around them. Place the boards tight confronting the base of the eave. If there'southward whatsoever slack in the tarp, keep wrapping the boards. And so, screw the boards and tarp into the wall using 2 inches (five.1 cm) screws.^[eleven]

7. 7

   Screw more 2x4 (38 x 89mm) wooden boards onto the tarp where necessary. The boards that are attaching the tarp to the roof are known as 'anchor boards'. If you feel that the anchor boards aren't enough to secure the tarp to the roof, or you see some areas that are loose, you should human activity. Lay as many 2x4 (38 x 89mm) wooden boards across the tarp as you see necessary and screw them in with 2 inches (v.ane cm) screws.^[12]

   • This tarp is only a temporary fix to damage in the roof. In one case yous accept practical the tarp, brand plans to get a permanent fix for your roof.^[13]

Advert

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advert

Video

• Placing a tarp on a roof can be dangerous work. If you tin, hire a professional to exercise this or become some assistance from an experienced roofer.

Advertizing

• Never stand on a tarp on a roof, particularly if the tarp is wet.

• Practise not climb up onto a roof during bad weather condition.

• Never stand on a steep-pitched roof.

• Do non walk on a damaged roof until you can pinpoint where the damage is. Do not walk on the damaged expanse. It could be unstable.

• Do non attempt this project alone in case of injury.

Advertising

Things You lot'll Need

• Record measure
• Brush
• Tarp
• 4 2x4 (38 x 89 mm) boards
• Cap nails
• Carpenter's gloves
• Drill
• 2 inches (5.one cm) screws

Near This Article

Article Summary X

Tarping a roof is a good mode to protect your abode from the elements when your roof or skylight is damaged. All you'll need is a large tarp, x wooden boards, and screws or nails. Although y'all tin can probably manage the job alone, it'll be much easier if yous go at to the lowest degree one more person to assist you, peculiarly if it's windy. You'll need to lay the tarp over your roof and nail each side through a wooden board and into your roof to go along it in identify. And so, attach the tarp to some other couple of boards where it overhangs your roof. Avert tarping your roof during bad weather, and never stand on the tarp once it's on the roof, since information technology tin can exist slippery. For more tips, including how to assess the damage to your roof, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 225,706 times.

Did this article help y'all?

Source: https://www.wikihow.com/Tarp-a-Roof

Share this post